6ES7416-3FR05-0AB0 Siemens SIMATIC S7-400, CPU416F-3 PN/DP

Specification Sheet for Siemens SIMATIC S7-400, CPU 416F-3 PN/DP (6ES7416-3FR05-0AB0)

Basic Information

• Product Model: 6ES7416-3FR05-0AB0

• Product Series: SIMATIC S7-400

• CPU Type: CPU 416F-3 PN/DP

• Application Areas: Chemical, Electronics, Electrical, Process Automation, and other high-performance industrial automation fields requiring distributed safety functionality.

Hardware Characteristics

• Interfaces:

• 1st Interface: MPI/DP, supporting up to 12 Mbit/s

• 2nd Interface: Ethernet/PROFINET, for high-speed network connectivity

• 3rd Interface: Plug-in IFM module slot, for additional communication or I/O modules

• Power Supply: Not specified (typically requires external 24 V DC power supply)

• Power Protection: External protection recommended (for power supply cables)

Memory Configuration

• Work Memory: 11.2 MB (divided into 5.6 MB for code and 5.6 MB for data)

• Load Memory: Typically uses an external memory module or flash memory card, depending on the configuration

• Retentive Memory: Available for retentive data blocks, size and configuration depend on the overall memory allocation

Programming Environment

• Supported Software: STEP 7 V5.4 or higher, with S7 Distributed Safety package for safety-related programming

Processing Capabilities

• Advanced processing power suitable for complex automation tasks and distributed safety applications

• Operation times for various arithmetic and logic operations are typically faster than those of the S7-300 series, but specific timings may vary depending on the configuration and workload

Additional Features

• Program Block Quantities:

• Maximum number of Data Blocks (DBs): High capacity, specific limit depends on overall memory allocation

• Maximum number of Function Blocks (FBs) and Functions (FCs): High capacity, specific limit depends on overall memory allocation

• Types and quantities of Organization Blocks (OBs): Supports a wide range of OBs, including those for safety-related functions

• Counters and Timers:

• S7 Counters: Unlimited (limited only by RAM capacity), with retentivity

• S7 Timers: Unlimited (limited only by RAM capacity), with retentivity

• Safety Functions: Integrated support for S7 Distributed Safety, allowing for the implementation of safety-related control functions according to international safety standards

Notes

• The above specification sheet is based on publicly available information and may be subject to change due to product updates.

• It is highly recommended to consult the latest official documentation or contact Siemens technical support for the most accurate information before purchase or use.

• Special attention should be paid to the requirements for safety-related programming and the compatibility of the CPU with the desired software packages and communication protocols.